When needing barriers there are many companies to choose from and many out there that will tell you what you want to hear and then leave you in the dark once the purchase is complete. When needing barriers we will help you make the right decision at the right price and give you a guarantee on what we sell you. We give you just what you need and nothing more. We offer a great barrier’s and with several types of barrier; s to choose from. One of the types of barriers that is commonly used because of the sturdiness and its cost is our Econo- Barrier.

The Econo-Barrier like its name is very easy on the pocket for no matter the size of your business, They can be used on land and also used in the water as well. They can be used anywhere and in any condition that arises. They are economical so you can purchase more for less and the quality is the best.

If you have any questions or concerns such as, How many should I get for the task that I need them for? How do they work? Any other questions or concerns about them just be sure to ask we will be more than happy to respond to any questions that you many have about our products. Do not hesitate to call.

Not only are the Econo- barriers easy on the pocket book and easy to use to set up. They are very visible. Because barriers can be easily joined by the connections that they have on each end, it makes easier to set up. Each and every of our barriers no matter the style has been tested and all of them have been retested before we put them out on the market to purchase. So take a look at our Econo-barriers and give us a try for best barriers that are out there. We stand by our product and by our word.

Centurion Barrier has established itself as the leading manufacturer and supplier of heavy duty barrier systems in Australia. With plans to expand into the Asian and Pacific markets, the success and expertise of Centurion Barrier is leading them to new and exciting places. Serving clients such as Royal Australian Navy, Queensland Rail Network, and Ford Civil Contracting, Centurion Barrier has built a reputation as a respected supplier of plastic water filled barriers for construction, delineation, and other uses.

Why Centurion?

Centurion’s barrier systems are specially designed to cope with Australia’s extreme and varied weather. From harsh sun to snow and ice, the barrier systems from Centurion are guaranteed to last through them all.

Since they deal exclusively in water filled plastic barriers, Centurion is an expert in what they do. Their products undergo rigorous testing to ensure that they will hold up well beyond the five year guarantee period offered on all of their products.

What Makes Centurion’s Barriers Different?

Centurion barriers are UV protected to avoid cracking and breaking due to sun exposure. While many people think of winter snow and ice as the harshest weather conditions, summer heat and UV rays can be just as damaging to plastic products that are constantly exposed to the elements. The UV protection that is part of Centurion’s plastic composition helps their barriers last for years out in the sunniest weather.

Not only are Centurion’s barriers designed to stand up to outdoor conditions, they are light and maneuverable when empty. This makes is easy to set up or move the barriers. Once they are filled with water, they are a solid, heavy delineation that can control any type of traffic.

Why Use Centurion Barrier?

Centurion Barrier has various products that are appropriate for many uses. Large, heavy barriers are ideal for delineating areas where vehicles need to be stopped from entering specific areas. These most robust barriers are often used in construction zones to direct traffic and avoid dangerous line crossing. Lighter barriers are appropriate for car parks or designating paths and areas for pedestrian traffic. Centurion even has barriers that are FAA approved for airport runway and traffic use.

Some places Centurion barriers are used include construction sites, go kart tracks, outdoor events, warehouses, driver training courses, and sporting events.

Centurion ships from the closest port for each customer’s convenience and shipping savings, and all products are guaranteed to last at least five years.

In part 1 of this article we looked into the detrimental effects the elements can have on plastic, in particular in the context of hot and humid climates such as those of Australia , The Middle East  and the South Pacific. Now, we will examine the effects the weather has on water filled plastic barriers and the groundbreaking methods modern manufacturing processes provide to counteract them.

Barriers Exposed

When it comes to polyethylene barriers, exposure to the weather is bound to reduce their longevity and effectiveness. One of the effects it has is discoloring, which will defy the purpose of a barrier that is intentionally designed to be bright colored and serve as a visible barricade rerouting traffic and channelling or warding off pedestrians.

Moreover, plastic that becomes embrittled will quickly lose its mechanical properties, become prone to cracking and therefore fail to fulfil its function. When this happens, your water filled barriers are as good as useless and you will realise that you have been throwing your money down the drain.

Rotomoulding: A Groundbreaking Method

To counteract that, rotomoulded plastic provides such resilience against breakdown that is hard to match by injection molding or other conventional ways of fabricating plastic. Rotomoulding ensures a one-piece seamless construction that provides a product that is much more durable to the corrosive effects of outdoor environments and has excellent load-bearing properties.

Since rotomoulding involves the constant rotation of resin that coats all surfaces evenly, this results in a final product of uniform wall thickness that, as such, exhibits greater endurance to stress. What is more, during this process special stabilisers are added in the plastic known as UV inhibitors. As their name suggests, these make plastic more stable under heat and light or both combined, since they absorb and diffuse radiation in a way that does not harm the plastic.

Other Benefits of Rotomoulding

Apart from the corrosion resistance properties, rotomoulded plastics are known to have a plethora of other desirable attributes that gives them a competitive edge over other plastics. To mention just a few: they are lightweight, chemical resistant, economically and environmentally sustainable because there is no material wasted in their making. Plus, their production process is much more cost effective, which in turn dictates the price of the end product.

Being constantly on R&D mode, we, at Centurion Barrier Systems and Centurion Barriers Asia and Pacific know what makes barriers durable to the elements of these particular climates and employ the latest technological processes in producing them. All our barriers are manufactured by rotational moulding to the highest quality standards to ensure their longevity and the most competitive prices for the end user.

Vehicle Safety barriers are specifically designed for steering back all those vehicles that are hitting the barriers. These barriers are designed in such a way so that they can easily achieve the impact to permit vehicles for deform and deflect back on the road. There are some particular vehicles that are vulnerable to vehicle safety barriers like motorcycles, Lorries and all those vehicles with a higher central gravity.

A vehicle safety barrier is a sort of barrier specifically used in designing roads. The basic purpose of designing these barriers is to perk up road safety and put off vehicles from departing the roadway. Moreover, here are some typical sites like mountain roads, bridge supports, multi-lane highways and median separators etc for vehicle safety barriers purpose.

Some improved safety barriers have been designed since the 1990s for lead back and holding up vehicles up to 40 to 50 tons. Besides that, there are several other types of vehicles safety barriers designed on permanent and semi-permanent basis. Some of these vehicle barriers can include:

Automatic Lift Arm Barriers

These types of barriers can be lined with access managing option on unlimited basis like coin machines, token, vehicle identification tags, remote control, proximity cards etc that can easily be integrated with accessible security mechanisms.

Automatic Lifting Kerb

Automatic Lifting Kerb barriers are specifically operated, functioned and developed through a metal plate welded steel material. The ultimate use of these barriers is to put off interruption through lifting up from the road outside to present a vehicle barrier crosswise the entrance of a specific roadway. These barriers can correspond to approximately 800mm in altitude and 5 meters in length.

Commercial and Domestic Mechanical Bollards

Mechanical bollards are particularly designed to confine right of entry in both domestic and commercial regions. These mechanical bollards are ideally fit for commercial roadways without charging no more than 50% duty cycle.

Safety Mechanical Bollards

Safety Mechanical Bollards can be operated through a manual or automated mechanism. Under manual operation, it is merely laid aside horizontally and then shifted to a vertical place and locked in. Similarly, automated vehicle type is typically developed into the ground and then lifts up to put off vehicle imposition.  It is advised to inspect into detail the accurate location of this kind of bollard before its installation.

Traffic Stream Control Plates & Safety Posts

Lots of these automated type barriers can be slotted into a survived safety mechanism just like the use of safety cameras with number plate identification capabilities.

Thus, if you guys are looking around for such above mentioned barrier types then check out entire product pages collection on Centurion Barrier Systems and you will surely found them ideally perfect in all aspects.

The demand of mechanical car park barriers has already risen with lots of people who utilized their own cars or transport on regular basis. With a trend of current progression in several countries doesn’t permit lots of people to hire on some particular jobs and same situation is happening with parking attendance as well. That is why; the significance of such mechanical mechanism has already increased hundreds times more than before.

So first of all, it is needed to know what a car park barrier all about is. It is basically a sophistically designed system in a property whose ultimate purpose is to provide signal to pedestrians and motorists regarding how to park and where to park. These car parking barriers are specifically designed with certain color matched features in combination with their environment. It is quite valuable for a property under numerous circumstances:

1. It restricts the illegal entry of vehicles into a specific premises or property.  This can easily be perform with the help of attaching some sophisticated mechanisms like license plate or card swipe just for the sake of recognizing to specific barriers.
2. It closely observe the exit and entry time of a vehicle.
3. It performs some specific operation to record registration number of vehicles parked in a specific area.

A car park barrier can effectively be utilized for both public and private localities just like:

1. Shopping Stores
2. Residential Properties
3. Public properties like hospitals, colleges, hotels and restaurants.
4. Create vehicle parking areas for staff in both public and private buildings.

Here are some useful measures to make car parking barriers more visible to pedestrians and motorists in the form of stop signs, bottom skirts and boom lights. You should look for those car parking barriers that are durable in quality and that could easily adapt to certain specific surroundings with comfort to operate. Lots of companies are available whose ultimate purpose is to provide such sort of barriers that could exactly suits to your particular needs and demands.

Lots of companies are there whose core objective is to try to provide their customers the ultimate level of reliability and quality with a combination of attaching state-of-the-art Wi-Fi high tech safety equipments. It guarantees you for an extreme level of peace of mind in the assertion of best quality and secure mechanical traffic barriers, road blockers, turnstiles and swing gates.

Thus, if you guys are looking around for certain ways that could make your building or property safe and secure yet economical for parking different kinds of vehicles then Centurion Barrier Systems could be a perfect solution you have been finding around.

Part 1 of 2

Rotational moulding is a production process that involves a heated hollow mould which is filled with a certain quantity of plastic, then slowly rotated in order for the melted material to disperse and stick to the walls of the mould. The rotation continues in the cooling stage, after which the mould can be opened to retrieve a complete hollow plastic object with walls of even thickness. This method has found many applications in industrial processes among them in the production of superior quality plastic barriers.

In this 2-part article we will look into the effects of weather elements on plastic, especially in the context of the South Pacific and New Zealand climate, and continue to elaborate on the counteracting effects of rotational moulding or rotomoulding and its application in water filled barriers. First of all, in order to better understand the importance of rotomoulding on exterior use plastics such as water filled barriers we need to look into the effects weathering factors can have on plastic.

Sunlight and humidity take a toll on appearance

The first symptom of weathering is visible in the colour that will soon start fading and yellowing due to the chemical reactions caused by sunlight and oxygen. To be more specific, what really damages plastic is not sunlight per se but solar radiation or UV light that initiates a destructive reaction on polymer chains, making plastic become brittle over time.

In humid climates in particular, this is usually accompanied by the polymer chain scission resulting in slow erosion and roughening of the plastic’s smooth surface. This starts a domino effect with underlying layers beginning to erode in turn and losing pigment as they are exposed to the elements. Appearance wise this means that the plastic will lose its initial glossy colour since light no longer reflects on a smooth surface. Rather it scatters looking faded and worn out.

Fluctuating temperatures make matters worse

Weather cycles and extreme weather variations from wet to dry and hot to cold and vice versa will also take their toll on plastic causing it to continually shrink and swell, and triggering a cracking of the surface. The latter, apart from affecting appearance, will also have an impact on the plastic’s mechanical properties such as tensile and impact strength and thickness.

Temperature alone can have a devastating effect on plastic causing a dramatic doubling of the breakdown process whenever the thermometer rises by 10 degrees C. Now, imagine all those factors combined – as is the case in real life conditions – and you can clearly see the amount of stress exerted on outside plastics that can accelerate normal weathering. This seen in the context of the South Pacific and New Zealand climate, where the combined effect of high UV and humidity levels is much more prominent, means bad news for plastic components that have to be exposed to the weather elements all year round.

Continue reading part 2 of the article, where we will see how this affects polyethylene barriers that are meant to be exposed to the elements for long periods and, most importantly, how we can counteract and significantly slow down the breakdown process.

Rotational plastic molding is an extremely versatile and economic process that relies on gravity and heat to produce parts with exceptional strength. The finished result is a stress-free, lightweight and seamless design that is very durable.

A variety of plastic resins are available to use, depending upon the product specifications, strength requirements and resistance to other substances required. Materials that may be selected include polyethylene, nylon, polycarbonate, polypropylene, polyvinylchloride (PVC) and custom formulated compounds,

The flexibility of RDP’s process allows for a wide range of shapes and sizes to be manufactured. RDP also offers products in a wide range of colors, with graphics molded directly into the part.

Steps in the rotational molding process:

1. After the type of resin is selected, a premeasured amount of plastic resin is placed into a mold.
2. The resin melts and fuses in a three-stage process. After the resin is loaded into a mold, the mold is inserted into an oven and rotated on two axes at low speed until the resin coats the inside surface of the mold cavity, fusing into a uniform wall thickness.
3. While still rotating, the mold is removed from the oven and is cooled gradually.
4. The rotation ends when it reaches the temperature that the part can be safely removed from the mold.